NEW FEATURES.

BLUETOOTH LOW ENERGY 5.0

iOS capability with TDN App

M8 CONNECTOR (4-pin)

Motorsports grade, screw-on

12x FASTER USB-C

Improved connection speed
(4 MB/s vs 330 KB/s)

RGB LED

Bluetooth Pairing & Device Status

What is the MPVI2+?

Connect > It is an OBDII interface tool that connects VCM Suite to your vehicle’s various control modules. Read > Diagnose and clear trouble codes, monitor vehicle performance or read from your various vehicle control modules. Edit > Optimize vehicle performance, fuel economy, and more. Write > License and tune any vehicle currently supported by HP Tuners. Drive >>>>>

Note: The MPVI2+ does not include any pre-loaded tunes or calibrations.


HARDWARE & SOFTWARE

Combine the MPVI2+ With VCM Suite for the most comprehensive scanning, logging and calibration tools on the market. Whether you are building a dedicated track car, a next level streetcar, or just want more fuel efficiency or better towing for your daily driver, HP Tuners has the tools to get the most out of your vehicle.

vcm-main-editor
vcm-main-editor
vcm-editor

Adjust a multitude of parameters such as spark, fuel, RPM limits, fan temps and speeds, transmission shift points and pressures, exhaust valve control, speedometer settings and many more. Then, write these changes back to the vehicle’s various control modules

LEARN ABOUT VCM EDITOR

vcm-main-editor
vcm-main-editor
vcm-editor

The most feature rich scan tool on the market. View, chart, and log diagnostic data in real time through the vehicle’s OBDII port. View vehicle Diagnostic Trouble Codes (DTC’s), configure fans, closed loop, gear select, timing, air fuel ratio and more in real time

LEARN ABOUT VCM SCANNER

WELCOME TO PRO.

The next advanced step for your MPVI2+. Together with Pro Feature Set, the Pro Link+ allows you to import up to two analog signals and one CAN signal at a time. Seamlessly integrate your Wideband O2, boost pressure sensor, and more, enhancing your calibration and logging experience. Standalone Data Logging is also new to Pro Feature Set, making it easier than ever to collect data while driving.

WELCOME TO PRO.

The next advanced step for your MPVI2+. Together with Pro Feature Set, the Pro Link+ allows you to import up to two analog signals and one CAN signal at a time. Seamlessly integrate your Wideband O2, boost pressure sensor, and more, enhancing your calibration and logging experience. Standalone Data Logging is also new to Pro Feature Set, making it easier than ever to collect data while driving.

Welcome to pro
Welcome to pro

MPVI2PLUS CONFIGURATION
SKU:  Category:  MPVI2 MPVI 2 Based Tags:  MPVI2

1 Pro Features

2 Universal Credits

3 Review

Pro Features: NA

CREDITS: 0

×