In addition to channels based on parameters received through the vehicle's OBD-II port, these input devices allow you to create channels for the following data sources:
| ￭ | External analog inputs connected to an MPVI2 via an attached Pro Link cable or an MPVI2+ or MPVI3 via an attached Pro Link+ cable. Your interface device must have a license for the Pro Feature Set. See Adding Pro Link and Pro Link+ Analog Inputs. |
| ￭ | A 500 kbps CAN bus input can be connected via a Pro Link or Pro Link+ cable. Your interface device must have a license for the Pro Feature Set. See Adding Pro Link and Pro Link+ CAN Bus Inputs. |
NOTE: VCM Scanner also lists the HP Tuners Expander Hub as an input option for these interface devices. This device is not available at the time of this writing.
