Manufacturer Locked Control Modules
Some vehicle manufacturers now put locking devices in their VCMs to prevent third parties from tuning the vehicle. Although most of these vehicles can be read by the VCM Suite without any problem, writing an updated tune to these vehicles may require special hardware.
For many of these vehicles, HP Tuners can upgrade the existing VCM to allow it to be tuned by our software or exchange it for a controller that has already been upgraded. For other vehicles, a special cable may be required.
GM
Controller |
Vehicles |
HP Tuners Solutions |
---|---|---|
E41 ECM |
2017+ Chevrolet Silverado and GMC Sierra 2500/3500 trucks with 6.6L Duramax diesel engines |
|
E99 ECM |
2019+ Corvette ZR1 |
|
E90 ECM |
2019 - 2021 Chevrolet Silverado and GCM Sierra trucks with 5.3L L84 engines and 6.2L L87 engines |
|
T87A TCM |
2017+ GM vehicles equipped with 8-speed and 10-speed transmissions |
Dodge / Chrysler / RAM / Jeep
Controller |
Vehicles |
HP Tuners Solutions |
---|---|---|
2015+ PCMs |
All 2015+ Dodge, Chrysler, RAM, and Jeep vehicles (except Dodge Viper) |
|
2018+ PCMs |
All 2018+ Dodge, Chrysler, RAM, and Jeep vehicles. |
Dodge 2018+ smart access cable (These vehicles also require the upgraded PCM above) |
Polaris
Controller |
Vehicles |
HP Tuners Solutions |
---|---|---|
MG1CA007 ECM |
RZR-Pro R |
|
All supported ECMS |
Supported Ranger, Ace, Sportsman, RZR, and Scrambler models |