assuming one has all the proper hardware and cables to unlock and read a file from a l5p was is the oldest software verison of VCM editor that can properly read and write to that ecm ?
assuming one has all the proper hardware and cables to unlock and read a file from a l5p was is the oldest software verison of VCM editor that can properly read and write to that ecm ?
07 classic
no your going to need newer version of hpt.
can the l5p be bench upgraded ? i see the upgrade tool connects to ecm fuse. so if that fuse was connected to a 12v the also cooperates with the bench tuning setup for switched ign voltage would that work ? or does it have to be installed in a vehicle ?
07 classic
you can purchase this to unlock your l5p without shipping it in.
https://powerstrokecustoms.com/produ...m-upgrade-kit/
I already own that. i also have a bench tuning setup for the lb7s. i was wondering if i had the right connectors to plugs the l5p ecm to the benchtop setup if i could perform the upgrade on the bench. and just figure out how to simulate the fused power that the upgrade tool connects to in the fuse box
07 classic
are you using benchforce?
I Have their original one yes. i know ill have to upgrade it to the newer ones which are now benchforce. but was just more curious if its possible. i have a friend who has a l5p ecm and was curious if its possible or if it must be installed in a vehicle.
07 classic
YES its is possible.
can the e41 upgrade ONLY be done with the vcm suite beta ? or can it be done with the latest stable version of vcm suite ?
07 classic
It can be done with the latest version of VCM Editor
It can be the stable version