still trying to wrap my head around the RPM limiter within the Hellcat ECU.
Now, because raising the engine RPM cut off in the PCM obviously wont do it, I'm trying figure out that ZF8 transmission shift patterns and output shaft limits.
I'm just focusing on the manual mode with paddles (for 5th gear pulls on the dyno) right now, and then worry about the rest after that's been solved.
From the sticky, I've gathered that the car is using those 5 shift pattern maps (shift situation M-Gate) for what I'm doing now.
Also it looks like the RPM's aren't engine but rather output shaft RPM's, as the number at the limiter while logging pretty much corresponds to what is set in the tables.
So, if I up those about 500rpm's, I should technically be able to spin the car more than 6150rpm (in 5th gear, manual mode using the paddles), correct?
What about the OSS limits? I've upped the max engine speed table a bit, but what about the 5 shift pattern tables below? The limits 5th gear are around 1100ish RPM's. Is that added on top of something, or what do they do?
thanks a ton,
Andy