Wow, ok thanks Keith. I need to figure this out asap. Thank you
Wow, ok thanks Keith. I need to figure this out asap. Thank you
09 LNF: K&N Cai, ZZP IC, Injen IC piping, 3bar maps, efr 6758 (440whp!), Zeitronix E85 gauge, Innovate LC-1, WOTbox, HPTuners/Selftuned
Glad I don't have my laptop with me today, I would be getting no work done, sounds like it's better for me to wait until tonight to download anyways.
Just tried that, it didn't work.
I also tried 2.24 and it says the same thing. This is too odd. Installed on my Win7 box fine
09 LNF: K&N Cai, ZZP IC, Injen IC piping, 3bar maps, efr 6758 (440whp!), Zeitronix E85 gauge, Innovate LC-1, WOTbox, HPTuners/Selftuned
2.24 is no longer on the customer page.
09 LNF: K&N Cai, ZZP IC, Injen IC piping, 3bar maps, efr 6758 (440whp!), Zeitronix E85 gauge, Innovate LC-1, WOTbox, HPTuners/Selftuned
Just a reminder to those downloading and upgrading... Backup your 2.24 if you still want to use it because this install will overwrite 2.24!
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
Nice job guys
Enhanced pids for 03-05 srt4?
I doesn't except my application key I just got via email.
Had to update the programer, works great now. Now I have to rebuild the config/channel files.
Thanks for this!
Last edited by o2l8; 02-01-2016 at 03:27 PM. Reason: Fixed it
Any reason the OS tab is blank in edtior? I had a similar issue on the beta version
I'm scrolling around it now. Seem ok. But one thing I notice is it's taking a few seconds to load a table or open a page. Before it was instant.
Also, for those experienced with this stuff please see my recent thread in the editor section.
When I download - the download says : Download VCM Suite 3.0. but the actual download is 2.24. I can assure you it is not user error either
https://www.hptuners.com/customers/d...&build=release links me to the 2.24 release VCM-Suite file
EDIT: Looks like it must be a cache issue with my work network. I remoted into my PC at home and was able to download the correct version!
Is there a help file, I looked for a minute but didn't see anything
This is exactly why I've only used 2.25 and now 3.0 scanner sparingly. Everything works in 2.24 and worked well enough to tune the cars and I do have countless hours in setting up the scanner for various different applications with Custom PID's etc. Luckily they did keep the PID access ID's similar so most of those were simple copy/paste into the "Maths" of the newer versions but IMO it's still clunky and quirky as compared to the simplistic 2.24 scanner.
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400