2010 Camaro ss, heads, cam, boltons, I had the whole tune nailed down pretty well, then I slapped a 175 shot on the car and it wont shift at wot at all. I have been walking the shift points back ( finally ended up at 4800) and pulling 5% out of the mph in both part and wot tables in all tables and still wont shift. craziest thing is, its also blowing past the limiter. 6800 rpm limiter saw 7k a few times and 7300 rpm once.
next part that gets me is, I went back to the na tune, reset the trans adapt and learn in the logger before and after flashing the good na tune back in and now its doing the same thing on the tune that was good na. . . . driving me nuts please help me out.
zerod out the inertia tq adders, upped the line pressure, turned off TM, tried verter locked and unlocked. still wont happen
this is the trans tune that was on it that was good on motor before I started hacking it to hell and one log of a pull on motor where its doing crazy stuff