I was wondering if there has been any beta upgrades from when I got it a year ago.
I was wondering if there has been any beta upgrades from when I got it a year ago.
'02 Corvette
LS6, MN6, LT's/X pipe and TI's, Honker CAI, AI 243 heads, PatG Custom Cam, FAST 102, LS2 TB, Red Top inj, HPTuners & NGK/AFX
Yes
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
how do I get these upgrades?
'02 Corvette
LS6, MN6, LT's/X pipe and TI's, Honker CAI, AI 243 heads, PatG Custom Cam, FAST 102, LS2 TB, Red Top inj, HPTuners & NGK/AFX
email support
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I'm currently using a beta program but don't know how much has been changed or added since my last download. Does each beta program have a time stamp and or a menu of updated or added features? I am currently struggling in my attempts to change the target rpm that occurs when traction control is active and both gas and brake are applied. I have changed the enable and disabled rpm's several times but have failed to see a change in the desired rpm as set by the factory program at 1500. Thanks
Here is a list of the things we've added in the beta, there is no timestamp.
This beta adds several new features for several platforms
Adds read support for most 2003-2006 NGC3 Dodge, Chrysler & Jeep platforms, we ask that you read as many of these vehicles and send us the .hpt file and an infolog while connected to each.
Adds support for interfaces starting with 116xxxxxxx
Firmware update for SPI chip id conflict
All platforms receive
New Editor code
New Scanner code with ability to scan most late model Chrysler/Dodge/Jeep applications
Net Framework 4.0 standards
Net Framework checks removed
Multi vehicle upgrade credit bug fixed
Fixed Spark table axes for RXAQ6BA ford strategy
Added read support for 97 Cutlass V6
Added read support for 2009 Ford Fseries Strategy TENF1
E67 code fix
2012 E38 Operating system fix
New operating systems supported
L4
16253010 16259676 12225336 12206016 9382944
9364978 12223048 9365314 9364968 9356822
16254760 16254761 16267102 16254731 12578877
9387547 12218880 12205378 9353697 9383067
9356827 9373182 9365340 12580032 9387552
1220464 12201231 9373161 16259650 12206031
16250926 12578878 9393832
P11
12583785 12218881
P12
12597424 12607148 12610643
97 V6
16257531 16253031 16243827 16254062
16265838 16252926 16255243
P04
9374770 9352742 9389353 9352757
12218400 12223490 12578500 12223490
12201687 12618883 9376662 9389259
12573407 12584933 12226103 12221348
12218171 12203659 12211256 12201870
9389700 9389351 12223440 12211252
12596603 12211496 12218411 12211488
12223436 12618881 9384035 12205332
12201881 9389680 12213452 9352617
12618861 9367747 12218860 9377380
9378072 9357027 9381810 12211506
12205339 12207433 9384017 16266347
12583371 9378077 12218853 9366323
9352803 12221678 9383308 12223495
12223435 9363607 12223486 9369198
12223489
P05
12581052 12619744 12635879 12585294
97 LS1 V8
16259806
98 LS1 V8
9355168
P59
12578128
E37
12610011 12618032 12635865 12628829
12630187 12628960 12628961 12635399
12639473
E38
12635859 12636005 12635863 12639835
12628982 12639270 12630465 12649046
12647991
E40
12593827
E55
55573067 55573114 12623990 12595778
92179468 12621961
E67
12636036 12639469 12635904 19211212
12638778 12618044 12632176 12639299
12630458 12615634 12630360 12617747
12630465 12635457
E69
12629314 12634286
E77
12616452
T43
24253414 24254909 24252573 24249179
24257135 24261871
T42
24243902 24252617 24252956 24243356
24256876 24255281
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
A40
15878459 25982141 24256578 24256580
Ford
HABND HABS2 HACCE HACCD
HADCD HADCE HADCK HAEDG
HAEDD HAEDH HAAMC HAAMF
HAAMG HACCK HACH3 HAAS2
HAAS4 HAAP9 HACHD HACHF
FBMR1 HACE8 HACE3 HAAT0
HAAT2 FPBF2 FBBT0 FBCE0
HAFDF HAFDJ HAFFA TENF1
FPBX1 FBCE2 FEBF1 HAEE4
FOAR0 OKCM7 FPASB TADP6
FBRE7 FBLF2 FSAEA HACF0
HAEE3 FBMMB HAAO8 FOASB
FBHR2 TAZP2 HAAND
Vortec
16258745
Dodge
05030232AE
I4 512k os 16250871 receives VATS Fuel Cut B switch
P12 pcm’s receive
To and from cobalt ss/sc unable to connect error fix
E77/E69 pcm's receive
Several overboost/underboost condition diagnositic test tables and constants
Map sensor tables
Wastegate & BOV tables
Fuel pressure tables
Injector tables
Fan tables
Spark tables
512kb & 1024kb LS1 platforms received
Options matrix
Platform type switch
Fan recirc switch
TPS High & Low fail constants
About a dozen new rolling idle tables and constants
IAT Scalar table
512kb LS1 pcm’s received
Cranking spark table
9375577 received TPS High & Low fail constants
os id 12212156 received
Upshift D2 2nd
Downshift D2 2nd
Upshift D2 3rd
Downshift D2 3rd
Following os id’s received Impact factor gain vs airflow, fuel on wall exp decay mult vs airflow, transient fuel min rpm, transient fuel max tps, min fuel milligrams & fuel from wall stabilization
12579405
12216125
Following os id’s received fan desired% v sect & dfco tps minimum
12579405
E38 & E67 pcm’s received
Roughly 50 new tables described here http://www.hptuners.com/forum/showthread.php?t=28498
The following E38 os id’s received 1-2.5 bar vcm enhancement:
12612381 12639270 12633056 12635863 12605732 12614676 12612281
12617631 12628990 12624402 12633016
E38 Starter check patch applied to:
12614676 12614088 12630501 12605732
12615493
E37 Starter check patch applied to:
12618032 12618044 12610011
E38 P2101 Throttle parameters added for
12617631
All E38 operating systems receive the following speed limiter constants
Speed Limiter 4WD Low
Speed Limiter Comms Fail
Speed Limiter Steering Fail
Speed Limiter Minimum
Speed Limiter ETC Fail
E67 OS id 19211212 received 1-2.5 bar vcm enhancement addition
E67 pcm's can now perform write calibration only without error
All E40 os’s receive cranking spark table
E40 os’s 12596734 & 12596660 received
P2101 Throttle tolerance params
T43 TCM's received a major 150+ table update including TM & TCC lockup tables requested
E37 support released
GMPP E67 pcm support released
GMPP EROD pcm support released
2009+ Allison TCM support released
2010-12 Camaro V8 ECM/TCM support released
2009-12 Corvette ECM/TCM support released
2009-12 CTS V8 ECM/TCM support released
2009-10 Mustang V8 ECM support released
2009-10 Savana/Express V8 gas support released
2009 G8 V8 support released
2002-2011 Ford BA, BF & FG support released
2009-2012 Escalade ECM/TCM support released
2009-2012 Silverado/Sierra V8 ECM/TCM support released
2009-2012 Tahoe ECM/TCM Support released
2009-2012 Colorado/Canyon I4, I5 & V8 Support released
97-04 V6 pcm’s
Received several open loop and injector tables added to all 700+ operating systems
Ford credit licenses lowered to 2 credits for single vcm licenses
Ford Scanner rate updates for faster scanning
Fixed airflow table address in Aust. Ford operating systems HAEDG/HADCK
Raised upper limits on pulse width min constant
Dodge Licensing is finished and awaiting final Firmware updates which have been pushed back until after the 2.24 public release for the sake of keeping the beta stable.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I know it's slightly off-topic, however in line with some of the recent upgrades, do you know if anything is in the pipeline to add Transient fuelling for P59 LS1 PCMs e.g. OS 12592433. Keep up the awesome work.
Cheers
SSUte email support.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Will 2.24 have any features like instant HP, torque, accelleration in MPH per second?
I had that on a program called directscan for a GN I had once, and its a neat to see how the HP and torque is affected by the changes in timing & fuel. Makes it more fun dialing a car in.
2000 Regal GS ~ 3.25 Pulley ~ Headers ~ 3"ex ~ 1.85 Rockers
Sold 06 TBSS ~ Front Mount T88 ~ 0-30 in 1.17 ~ 0-60 in 3.0
Wanted ~ Engine-less 95/Older 4x4 ~ Jeep/S-10/Ranger for TT Project
Many thanks, Bill. Legends Genuinely appreciated; it was the Min Fuel Milligrams I was especially after. I am impressed and thankful you guys managed to do it so quickly. This should sort out the issue for these injectors.
Again thanks
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
That's very honest - should've just left me believing in your super-awesomeness
Either way I'm a happy customer and appreciate the after sales support immensely.
Don't worry we're still awesome, I'll admit to that. I just don't want people thinking table adds are something that we can do in just a few clicks of a mouse...unfortunately there's a good bit more to it than that. Wish it weren't the case but turn arounds for these rarely are one or two days and I just want to make that clear for anyone that decides to email me saying "this guy got his update the next day where is mine..." lol
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
hey Bill, I have the 2.23 beta version that i got back around 9 or 10 months ago and wanted to see if there were any updates since then.... Right now it wont scan o2 sensor values or transmission values on my '02 Dakota 5.9 but it does scan lots of basic stuff like temps, advance, fuel trims, etc...
Yeah thats likely SAE pids, pretty normal for vehicles we don't support.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
oh ok. will the dodge jtec+ pcm stuff make it into the 2.24 or is it going to be later?
Likely much later. I wouldn't expect JTEC to be looked at until after 2012.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"