Page 2 of 2 FirstFirst 12
Results 21 to 27 of 27

Thread: Eats the porcelain out of the plugs....HELP

  1. #21
    Advanced Tuner veee8's Avatar
    Join Date
    Apr 2006
    Location
    Raleigh, NC
    Posts
    449
    This is what happens when you rely on meth as a fueling source, and part of the reason why I developed my port injection kits. Meth should not be used to crutch direct injection fueling shortcomings. You are basically assuming and hoping that an equal amount of meth will reach all the cylinders evenly. It won't.
    www.crawford-racing.com
    Home of the original and best selling CR-Fueler plug and play port injection controller kits for all GM Gen V direct injection platforms.

  2. #22
    Advanced Tuner
    Join Date
    Feb 2016
    Posts
    482
    METH kills engines and people lol

  3. #23
    Quote Originally Posted by veee8 View Post
    This is what happens when you rely on meth as a fueling source, and part of the reason why I developed my port injection kits. Meth should not be used to crutch direct injection fueling shortcomings. You are basically assuming and hoping that an equal amount of meth will reach all the cylinders evenly. It won't.
    One of your CR-fueler is in my future

  4. #24
    Tuner 9secZO6's Avatar
    Join Date
    Sep 2007
    Location
    On the Bayou around New Orleans
    Posts
    82
    Chris is so right about the meth distribution, but it’s so commonplace now that people think it’s acceptable to run 2 nozzles and crank the meth knob up. I’ve already started my piggy bank savings for the fueler and 2650.
    06 Z06 ETP heads, 244/256 hyd. roller, crower stainless shaft rockers, Kooks stepped race headers,elec. w/p, 160 stat, vararam, ram dual disk, ported intake and t-body, 100 shot spray until the 441 goes together http://www.youtube.com/watch?v=fm1hrBcq63U

    2016 Callaway Z06 a8 3lz zo7
    Heads, cam, headers, 2.3L s/c, 9.5 lower/2.625upper, meth, 103mm t-body,
    Stock high and low fuel system for now (I know right?)

  5. #25
    Advanced Tuner
    Join Date
    Aug 2005
    Location
    Posts
    335
    Who makes a copper for the LT4 that is equivalent of a 7?
    GO RAIDERS!!!!!!!!!!

    02 C5 Z06
    8.8@160

  6. #26
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,371
    Quote Originally Posted by vortech View Post
    who makes a copper for the lt4 that is equivalent of a 7?
    ngk
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3

  7. #27
    Advanced Tuner
    Join Date
    Aug 2005
    Location
    Posts
    335
    Quote Originally Posted by TriPinTaZ View Post
    ngk
    Part # please?

    Thank You!
    GO RAIDERS!!!!!!!!!!

    02 C5 Z06
    8.8@160