Page 1 of 13 1234511 ... LastLast
Results 1 to 20 of 251

Thread: VCM Suite 3.4 is here!

  1. #1
    HPT Employee Mark@HPTuners's Avatar
    Join Date
    Jun 2014
    Location
    Madhouse on Madison
    Posts
    364

    Thumbs up VCM Suite 3.4 is here!

    VCM Suite 3.4 is here!

    VCM Suite 3.4 improves on the very reliable VCM Suite 3.2 and brings even more NEW vehicle support and features.




    Click here to download the latest demo!

    Click here to see the latest supported vehicles!





    Editor Changes:
    • Even more controllers have been added for NEW vehicle support, including but not limited to:
      • 07/08 - 15 Mercedes AMG 63 Support.
      • 2017 GM Support.
      • 2017 Dodge/Chrysler/Jeep/RAM Trucks support.
      • 2010-2012 Cummins 6.7L Support (CM2200).
      • Ford Focus (TC-1767) Support.
    • Improved Overall Performance of VCM Editor.
    • Many NEW parameters added for existing support.
    • Many user-reported bugs now fixed.


    Full Changelog for VCM Editor: http://www.hptuners.com/help/VCM-Edi...changelog.html





    Scanner Changes:
    • Enhanced PIDs available for Mercedes and CM2200.
    • Many user-reported bugs now fixed.
    • Improved overall Scanner performance
    • Many RTT features have been added!
    • Even more parameters available.
    • More transforms.


    Full Changelog for VCM Scanner: http://www.hptuners.com/help/VCM-Sca...changelog.html


    Vehicle Addition Highlights

    GM:
    • 2017 GM Vehicle Support. Including, but not limited to:
      • 2017 Chevrolet Camaro
      • 2017 Chevrolet Corvette
      • 2017 Chevrolet Silverado
      • 2017 GMC Yukon
      • 2017 GMC Sierra
      • 2017 Cadillac XT5
      • 2017 Cadillac CTS
      • More supported as they are released!
    • Improved overall definition support.


    Ford:
    • 2012-2013 Focus ST Support (TC-1767)
    • Improved overall definition support.


    Dodge:
    • 2010 - 2012 Dodge Ram/RAM Trucks 2500/3500 6.7L Cummins support, INCLUDING Transmission Support!
    • 2017 Dodge/Chrysler/Jeep/RAM Trucks now supported. Including, but not limited to:
      • 2017 Jeep Grand Cherokee
      • 2017 Jeep Wrangler
      • 2017 RAM 1500
      • 2017 Dodge Durango
      • 2017 Dodge Charger
      • 2017 Dodge Challenger
      • More support will be added as the vehicles are released
    • Improved overall parameter support.
    • Improved overall definition support.


    Mercedes:
    (Yes, you read that right. With VCM Suite 3.4, we are proud to announce support for Mercedes.)
    • New Support for 07/08-2015 Mercedes 63 AMG (6.2L) Support including the following vehicles:
      • 2008-2015 C63 AMG 6.2L (M156)
      • 2007-2010 S63 AMG 6.2L (M156)
      • 2008-2012 SL63 AMG 6.2L (M156)
      • 2007-2011 ML63 AMG 6.2L (M156)
      • 2007-2010 CL63 AMG 6.2L (M156)
      • 2007-2011 CLS63 AMG 6.2L (M156)
      • 2007-2011 E63 AMG 6.2L (M156)
      • 2007 R63 AMG 6.2L (M156)
      • 2007-2010 CLK63 AMG 6.2L (M156)
      • 2010-2015 SLS AMG 6.2L (M159)
    Last edited by Mark@HPTuners; 11-16-2016 at 08:00 AM. Reason: Mercedes Correction: 6.2L 63 AMG Only
    My code doesn't work...I have no idea why.
    My code works...I have no idea why.

  2. #2
    Haha I downloaded it earlier today and couldn't find any release notes. Great Job!

  3. #3
    Advanced Tuner
    Join Date
    Apr 2004
    Location
    Erie, PA
    Posts
    451
    Damn, another major update! Keep up the good work guys!
    2001 Camaro SS M6 LS3

    - Erie, PA LSx Tuner -

  4. #4
    Tuner
    Join Date
    Jul 2015
    Location
    Poland (Europe)
    Posts
    121
    is 3.4 direct update and any logs, configs, channel etc. wont disapper as happened in 2.24 to 3.x update ?

    best regards

  5. #5
    Potential Tuner
    Join Date
    Mar 2008
    Location
    Los Angeles, CA
    Posts
    8
    "Transmission Segment Swapping has been added."

    Very interested in this. Where can I read up on this?

    Does this mean that I don't need a separate BIN file for a car of the same year as mine?
    That I can just take my stock Automatic file and swap in a manual transmission segment?

  6. #6
    Senior Tuner BackyardTurbo_FTW's Avatar
    Join Date
    Jul 2009
    Location
    East Suckburg, PA
    Posts
    1,008
    Dayummmm!

    Going to plug into the C63 when I get home and see what you guys have available for it. This was an incredibly awesome surprise that I never would have seen coming!

  7. #7
    Moderator
    Join Date
    Mar 2014
    Location
    Greensboro, NC
    Posts
    6,161
    Quote Originally Posted by wasyl View Post
    is 3.4 direct update and any logs, configs, channel etc. wont disapper as happened in 2.24 to 3.x update ?

    best regards
    Logs, configs, channels should transfer over. It's a much smaller update when compared to V2 to V3, that was a MAJOR update.

    I'm not 100% sure tunes saved in 3.4 can be opened in earlier versions though. Check that out if it's important to you to for some reason.
    Post a log and tune if you want help

    VCM Suite V3+ GETTING STARTED THREADS / HOW TO's

    Tuner by night
    CPX Tuning
    2005 Corvette, M6
    ECS 1500 Supercharger
    AlkyControl Meth, Monster LT1-S Twin, NT05R's
    ID1000's, 220/240, .598/.598, 118 from Cam Motion

    2007 Escalade, A6
    Stock

  8. #8
    Advanced Tuner veee8's Avatar
    Join Date
    Apr 2006
    Location
    Raleigh, NC
    Posts
    248
    Anything different with the 2017 GM's with this release? Still have to capture an infolog and send it in? Still 6 credits? T87 8 speed support?
    Owner: Crawford Racing LLC
    www.crawford-racing.com
    chris@crawford-racing.com
    Home of the CR-Fueler plug and play port injection controller for late model GM DI engines

    Tuner: RPM Motorsports
    Garner, NC
    chrisrpm1@bellsouth.net
    http://www.rpmmotorsportsnc.com

  9. #9
    Tuner
    Join Date
    Jul 2015
    Location
    Poland (Europe)
    Posts
    121
    i still use 2.24 and gettin use to 3.2 and dont want to loose any of old tunes

    best regards

  10. #10
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    24,182
    Quote Originally Posted by veee8 View Post
    Anything different with the 2017 GM's with this release? Still have to capture an infolog and send it in? Still 6 credits? T87 8 speed support?
    Still need to capture an infolog with 3.4 & send to support.

    4 credits now as noted on our supported vehicles list.

    We're still working on the new tcm's, no eta currently.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  11. #11
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    24,182
    3.4 should open old files without issue, however files saved with 3.4 cannot be opened with previous versions.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  12. #12
    Moderator
    Join Date
    Mar 2014
    Location
    Greensboro, NC
    Posts
    6,161
    Quote Originally Posted by wasyl View Post
    i still use 2.24 and gettin use to 3.2 and dont want to loose any of old tunes

    best regards
    Opening old files isn't an issue. Newer versions can open anything from older ones
    Last edited by schpenxel; 11-14-2016 at 02:30 PM.
    Post a log and tune if you want help

    VCM Suite V3+ GETTING STARTED THREADS / HOW TO's

    Tuner by night
    CPX Tuning
    2005 Corvette, M6
    ECS 1500 Supercharger
    AlkyControl Meth, Monster LT1-S Twin, NT05R's
    ID1000's, 220/240, .598/.598, 118 from Cam Motion

    2007 Escalade, A6
    Stock

  13. #13
    wheres the Jtec+ support??
    2002 Dodge Dakota 5.9 R/T reg cab
    Heads/Cam/Stall/Suspension/Tires/170?stat
    345rwhp & 350ft-lbs
    ? mile: 12.7@108mph

    1998 Pontiac TransAm Ws6
    Heads/Cam/Stall/Suspension/Tires/160?stat/HPTuners
    422rwhp & 400ft-lbs
    ? mile: 11.6@116mph

    2006 Chrysler 300c Srt8
    HHP Stage 2 Heads-Cam/Cai/Borla/85mmTB/180?stat/HPTuners
    never dynoed
    never drag raced

  14. #14
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    24,182
    Quote Originally Posted by ROCNDAV View Post
    "Transmission Segment Swapping has been added."

    Very interested in this. Where can I read up on this?

    Does this mean that I don't need a separate BIN file for a car of the same year as mine?
    That I can just take my stock Automatic file and swap in a manual transmission segment?
    Segment swapping was added back in 2.25 several years ago, lots of information in the trans section of the GM portion of our forum particularly in the sticky there as thats where it gets most of its uses.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  15. #15
    I hate to bitch but I don't see any of the more basic things I've (and others)complained about in the past being fixed. Still can't copy and paste tables without opening and highlighting every single one.
    Can't scroll all the way from left to right when copying a MAF table in the scanner. Well you can but it's ridiculously slow. It works fine in the editor so it seems like an easy fix.
    Can't "clear or load all data" in a graph.
    I have only looked at if for 5 minutes but these are things that are (were) very useful time savers I was hoping would have been addressed.
    A&A CORVETTE PERFORMANCE
    477 LAMBERT ST
    OXNARD CA 93036
    WWW.AACorvette.com

    A&A CORVETTE SUPERCHARGER SYSTEMS


    SUPERIOR ENGINEERING- SUPERIOR POWER
    SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT


    Andy@AACorvette.com 805- 278 4107 Toll Free- 1 888 VETTEPRO

  16. #16
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,643
    Quote Originally Posted by Andy@A&A View Post
    Still can't copy and paste tables without opening and highlighting every single one.
    This might make it into 3.6

    Quote Originally Posted by Andy@A&A View Post
    Can't scroll all the way from left to right when copying a MAF table in the scanner. Well you can but it's ridiculously slow. It works fine in the editor so it seems like an easy fix.
    Not sure if this will make it into 3.6. I don't know difficult a fix it is.

    Quote Originally Posted by Andy@A&A View Post
    Can't "clear or load all data" in a graph.
    This is by design. Change your view to "View Zoom Data Range Only" and adjust your zoom level to the level of history/data you want to see in the graphs.
    We got this guy Not Sure, ...

  17. #17
    Senior Tuner GHuggins's Avatar
    Join Date
    Jan 2015
    Location
    Cashiers, NC
    Posts
    3,005
    You mind deleting my other post? This must have been put up right afterwords Interesting on the supported vehicles now... Any chance of older Ford support (pre 04) and older dodge anytime soon - having been keeping up to date with everything so don't know if this is already done or not?

    Thanks,
    Greg
    https://www.facebook.com/passionperformanceauto/
    2013 ZL1 - Making 761 RWHP & 703 RWTQ with cam only internal engine mod / Built engine - 416 stroker, ported heads, full exhaust, 20psi out of a Magnuson Heartbeat, 108tb - Made 851 RWHP and 854 RWTQ on pump 93 and 936 RWHP and 912 RWTQ on E60

    2010 Corvette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on pump 93

  18. #18
    Moderator
    Join Date
    Mar 2014
    Location
    Greensboro, NC
    Posts
    6,161
    Quote Originally Posted by GHuggins View Post
    You mind deleting my other post? This must have been put up right afterwords Interesting on the supported vehicles now... Any chance of older Ford support (pre 04) and older dodge anytime soon - having been keeping up to date with everything so don't know if this is already done or not?

    Thanks,
    Greg
    Deleted other thread.

  19. #19
    Advanced Tuner
    Join Date
    Sep 2006
    Location
    Phoenix, AZ
    Posts
    552
    Thanks for the new release, and the reduction in costs on the 2017 GM Vehicles. That relief is much appreciated, and easier for business on my end.

  20. #20
    Potential Tuner
    Join Date
    Sep 2011
    Posts
    6
    Holy cow. Mercedes is a huge deal. Any word on if you guys are looking into the V12 biturbo cars? The tunes for those run $1,000-3,000 currently and they are typically done remotely and flashed by the customer. I would LOVE to be able to do my own. You could probably require a dozen credits on those cars and still be very competitive.