VCM Suite 3.5+ - 2017 GM Tuning SUPPORTED! (Important Info Regarding 2017 GM Tuning)
HP Tuners is pleased to announce support for the 2017 GM vehicles in version VCM Suite 3.5+
Unfortunately there were some changes introduced by the manufacturer this year which makes the licensing and tuning process much more difficult than previous years.
Step 1: Download and install the latest VCM Suite 3.5 beta update available on your customer page*
Step 2: Connect the vehicle and read it.
Step 3: IF you receive a message that the vehicle can't be read at this time and to try again. Please wait at least 30 minutes and then try to read the vehicle again using VCM Suite 3.5 beta.
1This is required only for the first time you are tuning a specific vehicle using a specific PC. Other instances where you will need an internet connection include:
- Tuning a different 2017 GM Vehicle
- Using a different PC to tune the same 2017 GM vehicle you have already tuned before
A few more important notes about 2017 GM Tuning:
- Vehicle licensing cost for 2017 is 4 credits per vehicle, due to the added complexity.2
- E92/E78/E80 ECMs are currently supported and T43/T76 TCMs are supported.
- E82 ECM support is in development and will be available shortly.
- T87 (8 speed) TCM support is uncertain at this time but we are looking into a possible solution.
Please email Support if you have any questions.
2 HP Tuners reserves the right to change this at any time. Thanks!
Thanks!
