Results 1 to 6 of 6

Thread: Little g runs 13.7@99 stock head/cam

  1. #1
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,279

    Little g runs 13.7@99 stock head/cam

    hehe, we went to atco last night he was having some tuning issues early, but once i got there and played with his tune he went from running 14.1@96 to 13.95@99 then 13.7@99 then 13.8@98 mind you this car has the stock plugs/wires and the valvecovers have never been off the car...a good amount of weight reduction and the right combo with some tuning tweaks have gotten him where he is...CONGRATS CRAIG!!! Thanks hptuners! Now if we can only figure out why the "2 step" wont let him launch at over 4500rpms :

    lata
    Bill
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  2. #2
    Advanced Tuner
    Join Date
    Mar 2004
    Location
    Germantown, MD
    Posts
    362

    Re: Little g runs 13.7@99 stock head/cam

    wtf else is on the car..
    -Bill
    2000 Camaro V6 Boltons and a tune

  3. #3
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,279

    Re: Little g runs 13.7@99 stock head/cam

    Quote Originally Posted by Missing2
    wtf else is on the car..
    lol ewp, Tq arm, bmr tubular kmember, !a/c, Manual 5 speed tranny, 4.10 gears(10 bolt), bullet in place of cat, stock manifolds, stock muffler, !stereo, BFG DR's...umm hptuners umm...thats about all I can think of...hes on the board but usually just lurks.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  4. #4
    Advanced Tuner
    Join Date
    Mar 2004
    Location
    Germantown, MD
    Posts
    362

    Re: Little g runs 13.7@99 stock head/cam

    Quote Originally Posted by foff667

    lol ewp, Tq arm, bmr tubular kmember, !a/c, Manual 5 speed tranny, 4.10 gears(10 bolt), bullet in place of cat, stock manifolds, stock muffler, !stereo, BFG DR's...umm hptuners umm...thats about all I can think of...hes on the board but usually just lurks.

    mofo needs to work on his 60fts if he is dunning DR's and trying to launch at over 4500

    i take it he is not running a belt either..

    meh..
    -Bill
    2000 Camaro V6 Boltons and a tune

  5. #5
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,279

    Re: Little g runs 13.7@99 stock head/cam

    Quote Originally Posted by Missing2


    mofo needs to work on his 60fts if he is dunning DR's and trying to launch at over 4500

    i take it he is not running a belt either..

    meh..
    running a belt still...but like i said hes got an ewp so its a shorter belt then stock...hes still got the compressor on the block too he just has it setup so it never turns on basically...and has all the lines removed to it. His car has like no tq to get him off the line...even with the bfgs he bogs off the line normally...last night he cut a best of like 1.88 on the 13.7 run and 1.91 on the last 13.8@98 run.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  6. #6
    Potential Tuner
    Join Date
    Mar 2005
    Location
    Ewing, NJ
    Posts
    9

    Re: Little g runs 13.7@99 stock head/cam

    The AC compressor was removed when he had the K-member installed. His belt is only on the crank, alt, and power steering.

    With 235/60/15 BFG DRs he has cut a best 60' of 1.878 launching at 4700. Lately it has only been allowing him to launch from about 4500....we don't know why yet.

    - Justin

Similar Threads

  1. Returned My Truck Back To Stock, Running bad
    By gmforlife in forum GM V8 Tuning - Engine, Gas (Gen 3)
    Replies: 15
    Last Post: 09-18-2007, 06:50 PM
  2. Need Stock tune, going Nitrous and have Advanced Timing
    By Guardiannknight in forum GM V6 Tuning - Engine
    Replies: 5
    Last Post: 09-04-2007, 09:57 PM
  3. Oh CRAP!!!! My IFR scale is different than stock!! Ugh! What to do???
    By WS6Fury in forum GM V8 Tuning - Engine, Gas (Gen 3)
    Replies: 5
    Last Post: 08-27-2006, 01:34 PM
  4. SD tune runs lean for 4-5 minutes then normal
    By phatbob in forum GM V8 Tuning - Engine, Gas (Gen 3)
    Replies: 18
    Last Post: 07-15-2006, 01:51 PM
  5. Replies: 2
    Last Post: 03-29-2005, 07:47 AM