Introduction
Thank you for purchasing HP Tuners MPVI Battery Power Cable.
All products are individually tested before they ship to ensure you receive a working product. Please read all the associated documentation to get the most out of your battery cable.
CAUTION: Intended Use: This product is intended to be used as a 12-volt power adapter to provide power from an external source to an MPVI device for vehicles that do not have a battery. AN ADAPTER CABLE MUST BE PURCHASED FOR USE.
To ensure compliance with WEEE and RoHS, HP Tuners engages in a take-back program in which customers may send products to the address below for proper disposal and recycling:
ATTN: Electronic Waste Disposal
700 Eastwood Lane
Buffalo Grove, IL 60089
United States of America
SAFETY INFORMATION
At HP Tuners, safety is our top priority. We are dedicated to ensuring that each battery cable has been tested for safety and reliability. Our team works diligently to design and manufacture battery cables that adhere to stringent safety protocols.
Additionally, we stay up-to-date with the latest industry safety regulations and standards to ensure that our products consistently meet or exceed all relevant requirements.
CAUTION:
| ￭ | Do not overcharge the battery or reverse the polarity of the battery or any charging unit. |
| ￭ | Always disconnect the battery cable whenever doing any welding near the vehicle. |
| ￭ | Ensure there is no wiring left un-insulated. Un-insulated wiring can cause sparks, short circuits and in some cases fire. Before attempting to run the engine ensure there are no leaks in the fuel system. |
| ￭ | Ensure all fuel system components and wiring should be mounted away from heat sources, shielded if necessary and well ventilated. |
| ￭ | Always be vigilant and adhere to all workshop safety precautions when working on any vehicle to ensure a safe working environment. |
LIMITED WARRANTY
HP Tuners warrants to the original purchaser of an HP Tuners MPVI Battery Power Cable that the product will be free from defects in materials or workmanship in the manufacturing process for a period of 1 year from the date of purchase. The 1 year limited warranty will apply to any Power Cable purchased through HP Tuners. During the applicable warranty period, we will, repair or replace (in our sole discretion) any Power Cable found by HP Tuners (in our sole discretion) to contain defective materials or workmanship, at no cost to you.
To file a warranty claim you must submit a ticket to our support team through the HP Tuners website or by emailing [email protected]. When submitting a warranty claim we will need the Power Cables serial number, which can be found on the bottom of the Power Cable.
This limited warranty will not apply to any problems with a Power Cable that, in HP Tuners’ determination, is a result of conditions, malfunctions or damage unrelated to defects in material or workmanship in the manufacturing process, including failure to comply with HP Tuners’ Compliance Statement. This limited warranty is not transferable and does not apply to any Power Cable not properly installed or properly used by the purchaser. The above warranty is the full extent of the warranty available for the Power Cable. HP Tuners specifically disclaims all other warranties, express or implied, including all warranties of fitness for a particular purpose or warranties of merchantability.
LIMITATION OF LIABILITY
IN NO EVENT WILL HP TUNERS, ITS AFFILIATES, SUPPLIERS, LICENSORS, EMPLOYEES, OR AGENTS BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, PUNITIVE, ACTUAL, CONSEQUENTIAL, GENERAL, SPECIAL, EXEMPLARY, OR OTHER DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, THOSE RESULTING FROM LOST PROFITS, LOST DATA OR BUSINESS INTERRUPTION) ARISING OUT OF THE USE OF A POWER CABLE PRODUCT, WHETHER BASED ON WARRANTY, CONTRACT, TORT OR ANY OTHER LEGAL THEORY AND WHETHER OR NOT HP TUNERS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.