Any news or is this after LS2 and USB cable?
Does the US get the 4 valve 5.4 litre, basic 5.4 SOHC with 4 value heads?
Any news or is this after LS2 and USB cable?
Does the US get the 4 valve 5.4 litre, basic 5.4 SOHC with 4 value heads?
LS1 LS2 LS7 tuner, L98, LT1 & Haltec
I believe it's going to come after LS2, I don't have a timeframe on that.Originally Posted by SRPerformance
The US has that motor although I'm not sure if the currect Navi's have the 4v or 3v heads on them. The older Navigators had the motor you describe. The GT (like GT40) and future GT500 will have a 4v version although it shares alot less with your common SOHC 5.4.
-Michael Rudolph-
2003 Redfire Cobra
Eaton Powered to a:
11.301 @ 129 1.68 60' MT DRs
11.85 @ 124 1.90 60' street tires
We are working on it right now. It will require the new USB cable.
Chris...
I count sheep in hex...
So Chris ... What do i have to do to start testing your AU side of things?
I believe Mario knows who i am..
Danny.
The new USB cable and LS2 software has arrived, any time frame for the Ford software?Originally Posted by Chris@HPTuners
I have a little Ford camp outside the workshop and they are getting restless! What can I feed them?
LS1 LS2 LS7 tuner, L98, LT1 & Haltec
I know you guys are flat out with the new USB but any news would be appreciated!Originally Posted by SRPerformance
LS1 LS2 LS7 tuner, L98, LT1 & Haltec
no news as yet, i can confirm we are able to read/write and scan these PCM's but the calibration work takes time.
Chris...
I count sheep in hex...
Chris,
Do you have any update on the tuning product for the Australian BA/BF Ford Falcons?
Thanks,
Kris
Ditto.Originally Posted by Kris
Chris, whats the news? we want to take on the SCT camps with their CAPA flash boxes.
Joe
LS1 LS2 LS7 tuner, L98, LT1 & Haltec
G'day SRPerformance I think that I know you from the FordXR6Turbo.com forums I came here this morning after reading a thread there today..
Yes, so do we. The calibration work is taking a little longer than we expected but it is happening.Originally Posted by SRPerformance
Chris...
I count sheep in hex...
Chris,
How are you progressing with the development?
Cheers,
Kris
Can't wait to tune Ford. I have customers waiting for tunes. Bring it on
New web sites looks and works well!
Any chance we will see the FORD XR6Turbo calibrations before Christmas?
Regards, Joe
LS1 LS2 LS7 tuner, L98, LT1 & Haltec
Is there a time frame for the retail sales of Boss and XR6T software.
When can we take our cars to a dealer and say I want a VCM software tune, will both the V8 and the turbo software be ready at the same time?
Looks like its a BIG no, or they are busy putting it together.Originally Posted by SRPerformance
Maybe a good idea to close the thread if there is nothing to report or any answers.
Any news with the Ford program yet?
was told its a no go same for holden V6
this is incorrectOriginally Posted by ntae
I count sheep in hex...
Then let the cat out of the bag Chris Ford,Alloytech=bring it on!!!!Originally Posted by Chris@HPTuners