hey guys
i updated to too 2.1 and now all the VCM controls in the scaner are gone? they are all grayed out even the fan control?
please advise
hey guys
i updated to too 2.1 and now all the VCM controls in the scaner are gone? they are all grayed out even the fan control?
please advise
http://www.turbov6camaro.com
1997 Stalled V6 Camaro
Goal: 10.99 in the 1/4
Goal: 100 MPH (completed)
Best Dyno: 456 RWHP and 509 RWTQ
Best: 1/4 mile 11.23 20 PSI
Best1/8: 7.18 @ 99 1.83, 60 foot 20 PSI
They will be greyed out until you hit the connect button. Once you hit the connect button are they still greyed out?
We got this guy Not Sure, ...
yes i was activly recording and they was grayed out rebooted PC and everythingOriginally Posted by Keith@HPTuners
http://www.turbov6camaro.com
1997 Stalled V6 Camaro
Goal: 10.99 in the 1/4
Goal: 100 MPH (completed)
Best Dyno: 456 RWHP and 509 RWTQ
Best: 1/4 mile 11.23 20 PSI
Best1/8: 7.18 @ 99 1.83, 60 foot 20 PSI
same problem using 2.1.6 on my 99 buick century...histograms come up as "vehicle unsupported" when I click on the table to see if its just a table error...it with gather the parameters & even scan then but it would need all custom histos to work and the bi directional controls are all grayed...works fine on my 00 gtp & 98 v6 camaro though. I got the info txt file saved if you need it.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
viper, use the latest 2.1.6 and that should fix your problem.
For us to support the vcm controls on the 99 buick centruy, we'd need you to read the vehicle and send it to us (which requires a license).
VCM Controls are Operating system specific, so we can only support them on the operating systems we have obtained.
We got this guy Not Sure, ...
will try thanksOriginally Posted by Keith@HPTuners
http://www.turbov6camaro.com
1997 Stalled V6 Camaro
Goal: 10.99 in the 1/4
Goal: 100 MPH (completed)
Best Dyno: 456 RWHP and 509 RWTQ
Best: 1/4 mile 11.23 20 PSI
Best1/8: 7.18 @ 99 1.83, 60 foot 20 PSI
ahh ok...its the wifes car & well its a buick century lol currently not paying for that lolOriginally Posted by Keith@HPTuners
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Same here, they are greyed out on my '98 Z28.
1998 Z28 Red/Gray HT, A4, 3.23
|Pacesetter, Hooker ORYP, Aerochamber|TSP Cam, PRC dual valve spring kit, LS2 timing chain|LS6 oil pump,|SLP Air Lid, P&P TB, FRA, TBB|Fuddle 3400 2.1, B&M cooler|GM iridium plugs, Taylor 8 mm|AMW catch can|J&M PHB & LCA's|HPTuners 2.1|HP House & Dyno Shop