It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Doh, I got the last beta when I was having issues with the 2010 Camaro I tuned last month. I guess I am asleep at the wheel
BTW, the Dodge scanner goes fastest when you don't scan any SAE PIDs. I think all the SAE PID's have a non-SAE equivalent + a lot more.
I count sheep in hex...
Is the Dodge scanner beta just reading OBD data at this point or is it displaying fuel tables, etc.?
(I'm anxious to buy the VCM Editor/Scanner package but not until I know what it can do and when. I bought a $350 Superchips tuner that was supposed to have custom tuning and NEVER delivered. Not doing that again).
Last edited by Jebb; 05-27-2010 at 11:24 AM.
Chris added the enhanced pid's to the most recent beta for most of the NGC3 operating systems.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I just purchased a 06 Dodge Dakota with the 4.7 HO. Will HPTuners plan on supporting this vehichle?
2000 Chevy Silverado 2500HD ECLB w/6.0 , 4L80E auto, 4.10 G80, K&N, Nelson Dyno Tune, STS Turbo, 02 PCM, IC, 44lb injectors,walbro 255lph, 05 E-Fans, and 160* t
2006 Dodge Dakota SLT 4x4 , 4.7 HO Needing HPTuner
2000 Chevy Silverado 2500HD ECLB w/6.0 , 4L80E auto, 4.10 G80, K&N, Nelson Dyno Tune, STS Turbo, 02 PCM, IC, 44lb injectors,walbro 255lph, 05 E-Fans, and 160* t
2006 Dodge Dakota SLT 4x4 , 4.7 HO Needing HPTuner
2000 Chevy Silverado 2500HD ECLB w/6.0 , 4L80E auto, 4.10 G80, K&N, Nelson Dyno Tune, STS Turbo, 02 PCM, IC, 44lb injectors,walbro 255lph, 05 E-Fans, and 160* t
2006 Dodge Dakota SLT 4x4 , 4.7 HO Needing HPTuner
To get the latest beta you have to email support and request it.
Last edited by Bill@HPTuners; 06-11-2010 at 02:35 PM.
Tyler
Last edited by Bill@HPTuners; 06-11-2010 at 02:36 PM.
2000 Chevy Silverado 2500HD ECLB w/6.0 , 4L80E auto, 4.10 G80, K&N, Nelson Dyno Tune, STS Turbo, 02 PCM, IC, 44lb injectors,walbro 255lph, 05 E-Fans, and 160* t
2006 Dodge Dakota SLT 4x4 , 4.7 HO Needing HPTuner
well i requested it and here's the response i got. "We no longer offer beta versions for serial interfaces only mpvi interfaces."
2000 Chevy Silverado 2500HD ECLB w/6.0 , 4L80E auto, 4.10 G80, K&N, Nelson Dyno Tune, STS Turbo, 02 PCM, IC, 44lb injectors,walbro 255lph, 05 E-Fans, and 160* t
2006 Dodge Dakota SLT 4x4 , 4.7 HO Needing HPTuner
So I ran the scanner on a 2005 magnum I had on the dyno last week. It was awful, very few supported PID's and I couldn't get what I needed. It could just be the 05 ECM (which is garbage to begin with) because the early 05 cars are a pain in the butt to tune too. I just thought I would share. I was pretty disappointed.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
ETA? I don't want to buy one of those crappy handhelds.
2000 Chevy Silverado 2500HD ECLB w/6.0 , 4L80E auto, 4.10 G80, K&N, Nelson Dyno Tune, STS Turbo, 02 PCM, IC, 44lb injectors,walbro 255lph, 05 E-Fans, and 160* t
2006 Dodge Dakota SLT 4x4 , 4.7 HO Needing HPTuner
I have been logging my 09 Superbee with the latest beta. Talk about a lot better. I was disappointed with the support on the 05's, but like I said, the 05 ECM is garbage. I spent 5 hours with an 05 magnum on the dyno because the battery had to be disconnected every time the vehicle was flashed or the tune wouldn't stick.
I am so used to tuning with HPT that I am really looking forward to the HPT dodge support. Tuning with some of the other software is not as straight forward.