Cant get my FJO unit to work with the scanner

[Dirk_Diggler]

but the LM! formula seems to be close

Here is my user configured mapping from the FJO manual

0,0.00
0.1,0.00
0.2,0.00
0.3,0.00
0.4,0.00
0.5,0.00
0.6,0.00
0.7,0.00
0.8,10.00
0.9,10.25
1,10.50
1.1,10.75
1.2,11.00
1.3,11.25
1.4,11.50
1.5,11.75
1.6,12.00
1.7,12.25
1.8,12.50
1.9,12.75
2,13.00
2.1,13.50
2.2,13.75
2.3,14.00
2.4,14.50
2.5,15.00
2.6,0.00
2.7,0.00
2.8,0.00
2.9,0.00
3,0.00
3.1,0.00
3.2,0.00
3.3,0.00
3.4,0.00
3.5,0.00
3.6,0.00
3.7,0.00
3.8,0.00
3.9,0.00
4,0.00
4.1,0.00
4.2,0.00
4.3,0.00
4.4,0.00
4.5,0.00
4.6,0.00
4.7,0.00
4.8,0.00
4.9,0.00
5,0.00


Could the cable be loading down the output???

[Monodax]

What were the results of the AFR = (V/.5)+10. formula?

[johnt]

Dirk,

The table you posted is non-zero only between 0.8 and 2.5V. Are you sure you're using the right range?

John

[Dirk_Diggler]

Yeah the FJO is non-linear and I cant use the formula.... THe only values i was given were from 10-15 AFR at those voltages

[Monodax]

I got this info out of their documentation so it appears to be correct.

10.00 0.00
10.25 0.13
10.00 0.25
10.75 0.38
11.00 0.50
11.25 0.63
11.50 0.75
11.75 0.88
12.00 1.00
12.25 1.13
12.50 1.25
12.75 1.38
13.00 1.50
13.25 1.63
13.50 1.75
13.75 1.88
14.00 2.00
14.25 2.13
14.50 2.25
15.00 2.50
16.00 3.00
17.00 3.50
18.00 4.00
19.00 4.50
20.00 5.00

[Dirk_Diggler]

Monodax that is for their new WB unit that has configurabe outputs. If you look at the same chart you will see the Legacy FJO output voltages and that is what i need to use for the older model. I gave up anyways because they are offering trade in so you can get the updated version. i am not bothering with it anymore . Ill jst be down since i wont have a WB for about a week or so

[Keith@HPTuners]

You can always load the Raw Voltage for the wide band input for calibraiton.