For a NA guy it is but for a SC guy that may be the norm (safety curtain). I dint know though this is just speculation...
For a NA guy it is but for a SC guy that may be the norm (safety curtain). I dint know though this is just speculation...
Total newb here, so take this as such.
Looks like an incomplete log you're working with (i.e. lots of points not filled in). From the whole pattern (everything listed at +5 or more), I would scale the entire VE table by +5 and then go for a long drive and try to get alot more of the points. Stay away from WOT too I believe. When you play the log back, look at the LTFT's on "last value" mode and work from that. (unless there's a good reason not to like bad data)
Try to work with the biggest blocks of numbers first, then narrow it down, avoiding changes that make the 3D map not smooth.
Forum experts, please correct any of this if it is not correct.
John.
2001 QS/Black Z06, Borla Stingers, Vararam, Longtube headers, HPTuners
"Dellz06" thanks for your imput......
The LTFT Histogram was only for example and over the last few hours I have been driving around making 5 logs which have as many cells as poss filled (avoiding WOT as much as poss)
I will take the average of these logs and edit based on the results.
www.hsvdriversclub.co.uk
Reply With Quote