PLX M-300 wideband hookup /setup

[tomulrich]

I have the PLX m-300 installed ...I have read the instructions. I just want to verify it with someone who has done this before.

What wires to I hook up from the I/O to the wide band?

Also what is the detailed process for setting up the wideband to be logged on HP tuners? using histogram etc.

Please expain in detail...new user..

Thanks Tom

[BQuicksilver]

On PLX M250, I tapped the white wire from the controller box and connected it to the EIO interface. I also tapped the ground (black) from the controller to the EIO, but in retrospect I think that was a waste of my time. Just connect the white.

The PLX was super-easy to get working with HPTuners, since they have a premade PID.

I'll be happy to help more if you need me.

[tomulrich]

Thanks for the input.....I will give it a try..

I think I have sufficient information on how to set it up in the HP tuner software.

Thanks for the reply

Tom