Results 1 to 3 of 3

Thread: Let's talk J3, EEC-IV and EEC-V

  1. #1
    Tuner in Training
    Join Date
    May 2003
    Location
    Posts
    10

    Let's talk J3, EEC-IV and EEC-V

    I'm researching the EEC-V PCM but material is woefully lacking in the public domain on these things. I've done GMP4s and MECS PCMs in the past but my "new" 2002 Mustang GT has my interest piqued. I swore I wouldn't touch it like my last few cars but buying one from a wreckers and playing on a test bench couldn't hurt now, could it? ;D

    I've found some nice info for the EEC-IV on the J3 service port and memory architecture but was wondering if anyone had any information on the processor, memory architecture and the J3 service port in the EEC-V unit?

    I suspect the J3 is similar but the processor and memory (esp. the flash part of the equation) is a mystery.
    --&&Mike

  2. #2
    Potential Tuner
    Join Date
    Oct 2003
    Location
    Posts
    9

    Re: Let's talk J3, EEC-IV and EEC-V

    Here is a link to some info.
    http://acc-electronics.com/cloud/efi/amarch/eec.htm
    I hope this helps.

  3. #3
    Tuner in Training
    Join Date
    May 2003
    Location
    Posts
    10

    Re: Let's talk J3, EEC-IV and EEC-V

    Excellent stuff. Thanks.
    --&&Mike