As of today's VCM Suite 3.4 build, there is a new parameter added that fixes the weird 4th and 5th gear RPM limit some of you guys have reported.
The Lower Clip parameter under limit needs to be raised up.
As of today's VCM Suite 3.4 build, there is a new parameter added that fixes the weird 4th and 5th gear RPM limit some of you guys have reported.
The Lower Clip parameter under limit needs to be raised up.
Eric Brooks
HP Tuners, LLC
Ya thanks Eric. I had actually hunted this for a little while since we do a lot of half mile stuff. Found it over the weekend while the guys were in Ocala and was able to test it and it works.
Awesome! Can't wait to try this out. Had a customer shifting to 5th early last year due to this...
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
I wish I didn't have to wait a few more months for the track to open up here. Last year was a frustrating year at the track causing me to lose many races I should have easily won because of it. I'm so psyched to try out Eric's fix for these rpm limit issues. I knew he'd get it figured out
great job
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
Has anyone confirmed this fix yet?
Still have a month or so before tracks open here locally.
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
Can this be added to the 2014 SHO? I'm encountering Engine Speed Limit (Torque Source Error 4) when launching at a high RPM with my SHO.
Are you guys maxing this out or just raising it a little or what?
This parameter isn't available for the SHO EcoBoost, but I haven't tried 3.6 yet. Any word on whether this is available for EcoBoost?
I already did but it's been a few months with no word or update. Recall I had an Engine Speed Limit error launching too hard off the line with my SHO.
Reply to the ticket email with a link to this thread.
Eric Brooks
HP Tuners, LLC
Eric,
I replied to the ticket email with this thread and my original thread on HPTuners, but I noticed I already included this thread in my ticket email from 2 months ago, and I haven't heard back from HPTuners.
Here was my original thread on HPTuners:
https://www.hptuners.com/forum/showt...pin-in-WOT-1-2
Eric,
Thank you. I was able to download the beta and change that setting.