Anybody know the pinout ? Is is posible ? I do have an OBD to direct pins adapter and a 12V power supply if its posible to try!
thanks.
Anybody know the pinout ? Is is posible ? I do have an OBD to direct pins adapter and a 12V power supply if its posible to try!
thanks.
Yes, connect the following to the large connector.
42 - Ignition
50 - Ground
58 - CAN-
59 - CAN+
62 - Battery
67 - Ignition
68 - Ignition
69 - Ground
70 - Ground
I had to wire in a switch to simulate the key on and off for my bench harness.