HP Tuners 2.25 BETA Release (2011+ Mustang supported + others)

[MMGT1]

Eric, maybe you'll have an idea for what I should try here. 2013 V6, when I try to upload the stock tune from the PCM I get “Unknown Controllers Detected. Specify or read again” Tried to read again and got the same message. Any clue as to what I should do from here? Had the car here last night for a while and it should be here today for us to try again if we can figure this part out

[Eric@HPTuners]

Eric, maybe you'll have an idea for what I should try here. 2013 V6, when I try to upload the stock tune from the PCM I get “Unknown Controllers Detected. Specify or read again” Tried to read again and got the same message. Any clue as to what I should do from here? Had the car here last night for a while and it should be here today for us to try again if we can figure this part out

You need to specify it is an ESYS PCM

[MMGT1]

Eric, thank you! Figured it was something simple, usually is eh?! Car is owned by a good friend of mine and we are going to spend the day on it today.

[Eric@HPTuners]

Eric, thank you! Figured it was something simple, usually is eh?! Car is owned by a good friend of mine and we are going to spend the day on it today.

You will need to send the read in to support so I can add the definition for it.

[MMGT1]

Ok, will do... should be here very soon and Ill send it in once I have it.

[06bluchevy]

I just purchased a '14 gt. Is there a way to data log the factory wideband? I looked for the pid but I only see STFT and LTFTs.

[Eric@HPTuners]

I just purchased a '14 gt. Is there a way to data log the factory wideband? I looked for the pid but I only see STFT and LTFTs.

I will be adding that into the scanner in the next few days.

[LEDbetter]

Any support for the 2010-2011 Chevy Traverse, GMC Acadia soon? I had been using the beta, but today when I went to update the 2.25 wasn't on my page anymore.

[Eric@HPTuners]

Any support for the 2010-2011 Chevy Traverse, GMC Acadia soon? I had been using the beta, but today when I went to update the 2.25 wasn't on my page anymore.

Check the supported vehicles page. We updated it this week.

[LEDbetter]

Thanks Eric. I see that 2009-2011s still aren't supported yet. But I was blown away when I saw how many credits it costs to license a Viper lol. 20?!

[caesar]

Any support for the 2010-2011 Chevy Traverse, GMC Acadia soon? I had been using the beta, but today when I went to update the 2.25 wasn't on my page anymore.

Request a new 2.25 beta from support. These are supported.

[PST]

I will be adding that into the scanner in the next few days.

Please, please, please add it today.. Pretty PLEASE!

[Eric@HPTuners]

Please, please, please add it today.. Pretty PLEASE!

I'll see what I can do :-)

[PST]

Awesome! Heading to the Dyno now.

[PST]

And if its available, a pid that logs the timing changes due to knock retard/advance.

[wbt]

And if its available, a pid that logs the timing changes due to knock retard/advance.

I believe you can extrapolate that by looking at knock and spark advance. Of course having the car under load on the street vs. dyno may net different results.

[vortech]

Will the 2005 and earlier Mustangs be supported anytime soon?

TIA!!!

[GPGTP]

I'll see what I can do :-)

Yes knock would be great if it's not already added to the latest beta.

[ElecTech]

Will the 2005 and earlier Mustangs be supported anytime soon?

TIA!!!

2005 is currently supported. It's 2004 and earlier for Mustangs.

[Eric@HPTuners]

Will the 2005 and earlier Mustangs be supported anytime soon?

TIA!!!

Yes