anyone w/ plx?

[ixc]

Just wondering how you had to wire it to the pigtail. I ran my white cable to the white on the EIO and the logger read 12.65 all the time. I then connected the ground on the EIO to a ground on the car. It still reads 12.65 all the time.

What am i missing? The PLX device has it own 12v/Ground for the unit and a wideband output (white) narrowband output (gray)

[eatme]

Are you using the space directly under the "intake air temp(sae)" on the default config table view? At first I wasn't, and had the same problem you are having. Each of those blank spaces is assigned a different lead on the pigtail.

[ixc]

Are you using the space directly under the "intake air temp(sae)" on the default config table view? At first I wasn't, and had the same problem you are having. Each of those blank spaces is assigned a different lead on the pigtail.

i was actually using the one that was just below that:

intake air temp
blank
plx

I'll give that a try - thanks

edit: it worked great