Ok guys I'm fresh on the HPtuner and wanted to get some advice on how to proceed on this build.
2011 Silverado 4.8
Lysholm Twin Screw SC 8.5 lb pulley
55 lb injectors
Relocated IAT to Manifold
Truck cranks and idles like stock. Is driveable until SC starts to boost and cuts fuel. (My shop is 1 mile flat ground from my house so no I'm not out pounding it)
HPTuner has unlocked the VCM for this truck and I am tuning with latest BETA release .147
Im assuming there wont be a 2 or 3 bar OS enhancement released for this in the near future so I want to proceed with the stock MAP sensor and just get a base file in until we can schedule in the full dyno tune.
I've read almost the entire Gen IV section, watched all the vids, and clicked through numerous files to see the differences.
Im lost on where to make my changes to the Primary VE table as I cant find it, only can find cranking, lo ALT and HI ALT.
Maybe everything is running together in my head but if someone could just give me a simple roadmap here I'd appreciate it. I can work the details out I have just confused myself with information overload.