I can get the [SENS.XXX] to work when trying to create custom PIDs, but as soon as I do a [PID.XXXX] I get the message in the scanner "unsupported parameter".
What am I doing wrong?
I can get the [SENS.XXX] to work when trying to create custom PIDs, but as soon as I do a [PID.XXXX] I get the message in the scanner "unsupported parameter".
What am I doing wrong?
You need to insert the A/C Pressure into the table display that way when you log it log's that sensor, then your custom PID can use that sensor to modify it anyway you need to make it work with your wideband. Just making the custom PID and logging it won't work. Each PID that you have in your custom calculating PID needs to be logged in order for the custom PID to be able to have info to calculate.
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
Thanks a lot guys. Got it working now.