Injector Flow rate limitations in 2005 and up Vettes

[mowton]

I am helping a friend with his 2007 Vette and noticed that in 2005, the Injector Flow Rate limit was reduced to 63.5 lb/hr? How would you use a 60 or 80 lb injector with these PCM limits?



Just when I thought I was beginning to understand.......................

Thanks,

Ed M

Update -- Scaling seems to be an answer, but how would you know all the effected tables that need scaling??????? Does anyone have an AUTOMATIC SCALAR, much like the rear/tire size scalar in the SPEEDO section for shift/TCC points?

[Whiterhino]

i remember this thread from awhile ago. Not sure if it helps, but hopefully.
http://www.hptuners.com/forum/showthread.php?t=15293

[carlrx7]

this is what i did.

i ended up putting all the scaled numbers under Idle tab back to stock,, i dunno what was going on, but the car would stall alot.

hope this helps.

-carl

[mowton]

this is what i did.

i ended up putting all the scaled numbers under Idle tab back to stock,, i dunno what was going on, but the car would stall alot.

hope this helps.

-carl

Thanks guys for the inputs The thread has alot of good info and has some of the greatest minds participating. Will take a bit to digest.

Carl, I printed your checklist and it looks good. One question, it appears to be the output of the File Compare function. This may be a dumb question, but what do the terms Check, Skipped and OK mean. I tried the Help file but couldn't find an explanation.

Thanks again guys for you interest and info

Ed M

[carlrx7]

thats just what I typed in, as i was going through the scaling process. OK means i scaled it, skipped means i didn't, and check ment i verified.

[mowton]

I have been working on an Excel work sheet to help do the math and it is a work in progress. Wondering if I am heading in the right direction or wasting my time.

Have a look and be nice

Ed M