Results 1 to 5 of 5

Thread: Fan relay control on 2006 1500 truck ECM

  1. #1
    Potential Tuner
    Join Date
    Jan 2009
    Posts
    7

    Fan relay control on 2006 1500 truck ECM

    I installed a stock 2006 5.3, 4L60E and the factory ECM in a 66 El Camino. Does anyone know if this ECM has fan control relay outputs? On my ECM schematics I can not identify an output that was intended to control the fans. I know some trucks use a water pump driven fan. Anybody familiar with this?

    Thanks!

  2. #2
    Quote Originally Posted by fishlips View Post
    I installed a stock 2006 5.3, 4L60E and the factory ECM in a 66 El Camino. Does anyone know if this ECM has fan control relay outputs? On my ECM schematics I can not identify an output that was intended to control the fans. I know some trucks use a water pump driven fan. Anybody familiar with this?

    Thanks!
    The 06 uses electric fans. The ECM should have an output for fan control.
    -Ryan

    2002 ECSB
    Radix 3.0"
    220/226 548/575 114LSA
    TOG Headers

  3. #3
    Tuner in Training
    Join Date
    Apr 2008
    Location
    Alton, IL
    Posts
    25
    Try connector C1 pin 42 (dark green)for the low speed fan and C2 pin 33 (dark blue)for the high speed fan.
    -John

  4. #4
    Potential Tuner
    Join Date
    Jan 2009
    Posts
    7
    Thanks folks! I will give it a try.

  5. #5
    Potential Tuner
    Join Date
    Jan 2009
    Posts
    7

    Fan Control

    Thanks again guys. Hooked them up and can now control the fans! Much better!!