3 Bar Scanner config

[30thta436]

See that PID named Boost...

yeah, thats your issue.

I added that after I sent the log run. could it be anything else?

[Bill@HPTuners]

after looking at that second log where you go 100% tps & still only hit 103kpa, I believe you either still have a 1bar map sensor installed or you are NOT hitting boost at all. Do you have a boost gauge?

[30thta436]

I installed a 3 Bar Map Sensor.....and I don't see how a D1SC with a 3.7" pully is not making boost

[Bill@HPTuners]

What is the P/N on the sensor? Do you have a boost gauge?

[30thta436]

GM 12223861

Boost gauge isn't hooked up currently. but the car made 10lbs with a 4.5" pully and all that was changed was the pully size and map senser.

Is it possible that the 3bar OS didn't load completely and that is why the scale is stopping at that KPa?

[30thta436]

GOT IT FIGURED OUT!

Thanks for your time Bill

[Bill@HPTuners]

GOT IT FIGURED OUT!

Thanks for your time Bill

Please do tell what exactly it was????

Its very possible it may help someone else out in the future.

Thanks,
Bill

[WhiteHotG8]

Im having the same issue while trying to log a ls1 with 3 bar map. Boost gauge read at least 7lbs but kpa does not go above 105 in the scan. Do i need to make a different table other than map to utilize the 3 bar or should it have worked automatically. I'm using same sensor as posted above. Here is a log.

[Bill@HPTuners]

Im having the same issue while trying to log a ls1 with 3 bar map. Boost gauge read at least 7lbs but kpa does not go above 105 in the scan. Do i need to make a different table other than map to utilize the 3 bar or should it have worked automatically. I'm using same sensor as posted above. Here is a log.

You aren't logging the 3 bar pid as explained in the help file.

[PAT WS6]

my table reads right with my 3bar wont work right in the histogram i change the row axis to the 3bar and it doesnt do anything.... mean while in the table its actually logging the right kpa...

sorry for bringn up an old thread

[Mr. 2008 SS]

Good reading, Now I am think about a turbo set up for my 2008 TBSS small
(60 mm or less) at what psi should I need a 2 bar set up?

Thanks,
Mr. 2008 SS