3>4 shift

[moregrip]

my shift rpm vs shift for 3-4 is at 8192 & my shift speed vs shift for 3-4 is set at 75 mph.

here's my problem, In D4, at WOT it shifts to 4th @ 4600rpm everytime, in other words, I can't take 3rd any farther rpm wise than this 4600rpm because it shifts on me. I want to stay in 3rd longer at WOT, but as of right now, the only way I can do that is if I'm in D3.

[rattle]

you need to raise your 3-4 shift speed in the shift speed VS %tps table

[moregrip]

you need to raise your 3-4 shift speed in the shift speed VS %tps table

thanks
do both values have to be met to perform the shift or just one or the other?

[12secSS]

Both your rpm and speed table values need to be met under the WOT settings to work under WOT application. The part throttle settings, even the 100% in part throttle or below the WOT enbale setting, are not active for WOT gear shifts. It would be wise to have the WOT shift setting in part throttle match the actual WOT shift settings in the WOT tables.

[moregrip]

Both your rpm and speed table values need to be met under the WOT settings to work under WOT application. The part throttle settings, even the 100% in part throttle or below the WOT enbale setting, are not active for WOT gear shifts. It would be wise to have the WOT shift setting in part throttle match the actual WOT shift settings in the WOT tables.

thanks! That sounds completely logical

I'm on it