In the closed loop fuelign section, the Mode vs. Airflow table. It looks to me like a table that decides a "mode" (or airflow zone per se) for the VCM to look up under different amounts of airflow. Im assuming the numbers at the top of this table (0-320 in increments of 4) are referencing some kind of measured airflow, but in terms of what? Defintely not lbs/min from the MAF, maybe grams/sec, but only going up to 320? Or is it derived from what the VCM expects it to be in the MAF sanity check table?

Im looking to stick a car in open loop mode under certain conditions, i.e. at idle, and WOT. This looks like where I need to start