Hey guys I think I just seriously broke something. Is there any way to check the each individual cylinders spark? I tried a cylinder balance but I think that is just for fuel. I need to check spark. I'm hoping I just blew out the plugs. It feels like I'm running on 6 cylinders. My spark is comletely eratic and I can not hold an idle, and everything is running supper rich. All this started after a 60-120mph run. It started as soon as I let off the gas. The car is sputtering and trying to die. So how can I monitor spark per cylinder. It is either plugs are coil paks. I'm just hoping that I didn't bend a valve or something. I didn't hit the rev limiter so I think I'm ok there. I added some spark last night and I really think that I just blew out a couple of plugs. Is there anyway that I could use the scanner to narrow it down to which cylinder, so that I don't have to pull all of them. BTW I'm not measuring any misfires, which is making this realy weird. I thought I would be getting misfires with messed up plugs. I ran a log and the spark is flucuating wildly and so is the map. I am getting a p0106 map perfermance error, but I think the error is just because of the fluctuating wich is directly related to the spark problem. Ok so Jimmy or somebody how in the heck can I measure spark per cylinder? Help please guys!!!
Matt