2 Attachment(s)
Can not disable VATS on 2000 Buick Lesabre 3800
Have an engine and PCM from a 2000 buick lesabre going into a sand rail. Have performed these changes as you state and the engine will still not start. Attached is the tune file and also a scanner log with VATS status bit support.
Quote:
Originally Posted by
Chris@HPTuners
To disable VATS you must do the following:
1. Set the VATS value to "PWM"
2. Set DTC P1626 to "3 - No Error Reported"
3. Set DTC P1629 to "3 - No Error Reported"
If you have problems please email your file and a scanner log while logging the VATS status bit to support.
Chris...