Im getting PO at this VE

[domestic rice]

Why or how can I do a back to back run, 1 tells me I am -10 in the ve then the next said that Im +6??????


This makes no sense

[Country Boy]

Im unable to open file. Failed validation check?

Are the trims diabled? DFCO disabled? COT? MAF?

[Bill@HPTuners]

looks like they are both log files possibly? and just the .hpt file is misnamed?

[Bill@HPTuners]

I will say you have a bunch of not needed pid's selected like Mass air flow sae & trims(all of them)

[domestic rice]

I will say you have a bunch of not needed pid's selected like Mass air flow sae & trims(all of them)

unneeded pids will make this act crazy like this? How do I post them so you guys can open them?

[Bill@HPTuners]

unneeded pids will make this act crazy like this?

crazy like what? You only posted 1 scan log so we have nothing to compare against. Just your word. Not to mention you didnt post your tune which also doesnt help the case.

[domestic rice]

I though my tune was up there, here it is again.

[Bill@HPTuners]

ok, now im just waiting on a scan log to compare to. You've posted the same scan log 3 times now.

[domestic rice]

Here are some other logs. What I am talking about can even be seen in that 1 log I posted. It will I did 2 back to back logs in that one around frame 6297, at the 5600 rpm It had -14, and the very next wot (same log), with all the same adjustments nothing touched, It was around -1.

[domestic rice]

Anyone?

[domestic rice]

Here is a perfect example of what I am talking about. These short logs were on the way home. Both have the same settings. What could make them so different, almost 1afr off???

I need some advise here fellas, I am sick of this knock. I have tried to pull 4 deg and Im still getting knock.

[domestic rice]

I think this is the same tune I had posted above, if not then here it is.

Can people not open these or does no one want to give me a suggestion on whats wrong?