Howdy! 2011 F-350 6.7 had to get stock file installed after a bad tune. Got the stock installed (limp mode of course) and ordered HPTuners MPVI2. When that came in I first downloaded the stock file off the truck and backed it up in a few places for
deleted 6.7.powerstroke reduced engine power. Then got to work on the egr and def deletes. Fast forward to loading the tune back. Everything seemed to be ok but after the last stages were done, I thought was odd that the reduced engine power light stayed. Anyway I took off down the road hoping it would have cycled through everything needed and would return to normal but it has not and still stuck in limp mode.
Not sure what I did wrong and nothing should be telling the engine to go into limp mode as far as i can tell so i was not sure if i missed or needed to hard reset something.
Any help/advice/recommendations are greatly appreciated!