got my LM1 connected and im trying to figure this out. My LM1 is showing 20.9. I had the red wire connected to pin 1 of my eio and was only getting 10.x for my afr. i plugged in the white on and ive gotten close. Using the default PID for the LM1 hpt is showing 19.7x for free air and my LM1 unit is showing 20.9. Do i create a custom pid or is that what its supposed to be? LM1 analog 2 is set to the following:
bosch lsu4.2
14.7 gasoline
0v=10
5v=20(4.996v=19.99)