LS7 - Cam motion stage 2 - Base tune

[yo_its_devo]

I have a c6 z06 and just put a mild cam in the car. It's a Cam Motion Stage 2. I'm looking for any advice on how to update my tune for the first startup or even better if someone could send me a tune with a similar setup to get me started.

The cam specs are (228/240-118+4)
Other mods are Haltech intake and Kooks LT headers.

Just did a full engine rebuild as well so I'm a bit stressed about this first startup and would love to have a solid starting point for the tune to reduce the things I have to worry about.

[ctsv2011]

please post your tune if you need help

[LS ROB]

^^^

[yo_its_devo]

It's basically just a stock tune right now. I guess my question is for initial startup, will it run okay enough to at least idle and break in on the base tune? If not, what parameters should I change beforehand just to get me up and running?

[C6_Will]

I'd start with raising the idle speed some and adding a little to the BRAF. Car should start and adaptives should adjust enough to get it idling decent. Would try to get a decent tune it as soon as possible though.