Howdy all. I have a problem with 1barSD. When scanning the Grams/cyl only go to .40 at wot. Should go to .68-.72. Ok if I go back to factory OS? Any thoughts. Thanks Chev
Howdy all. I have a problem with 1barSD. When scanning the Grams/cyl only go to .40 at wot. Should go to .68-.72. Ok if I go back to factory OS? Any thoughts. Thanks Chev
Try reading this thread. http://www.hptuners.com/forum/showthread.php?t=10056
I think you will have to remove the Maf airflow from the .cfg file to get the correct display.
Thanks brh26. Worked a treatOriginally Posted by brh26