P12/LSJ 3 bar os cal? SCIP table?

[djt81185]

Would it be possible for the lsj to get a 3 bar calibration OS and a larger IFR table? Were maxing out the stock 2 bar stuff and I have a feeling its really gonna mess with us soon

Can we also get the table values for the SCIP map sensor. You have it in the 2.4 pcms but not in ours...and they dont have a s/c.

Thanks,

Dan

[zinner]

x two

[Chris@HPTuners]

the PCM has an internal limit for the MAP pressure that is 256 kPa and going above this is not easy, hence you probably won't see a 3bar OS in future. I added the SCIAP to my to-do list

Chris...

[zinner]

Thanx!

[Bill@HPTuners]

some of the cobalt 2.0 guys were wondering if its possible to log this pid/sensor shown in the pic?

Thanks
Bill

[Chris@HPTuners]

it's on my list

[djt81185]

Also if anyway to change the axis for the IFR, VE (Baro and RPM), or Spark table would be greatly appreciated as most modded cars are out of range already. Also 3 bar support would be lovely!

Edit: also proper shift light operation would be awesome!

Thanks guys!

Dan

[NoRemorse]

the PCM has an internal limit for the MAP pressure that is 256 kPa and going above this is not easy, hence you probably won't see a 3bar OS in future. I added the SCIAP to my to-do list

Chris...

so we could still scale it, but lose resolution, I assume.

[Bill@HPTuners]

Also 3 bar support would be lovely!

http://www.hptuners.com/forum/showpo...01&postcount=3

[H8 LUZN]

well as long as you have a mass flow sensor.. you can do 3bar stuff.. just no speed density 3 bar..