My current vehicle is a 2002 Envoy, not looking to do much to this one currently, but may pick up an 06+ down the road, may go with forced induction, still undecided.
I would like to both monitor fuel trim data, timing, basically everything, and have the ability to modify if necessary my parameters.
I would likely need to use this on 2-3 vehicles of my own, and likely add in 3-4 vehicles later. If possible,.changing trans shift points, pressures, idle speed, lockup speed and load settings for lockup etc.
Not sure what to get, I figure I would ask here to get the correct info and I also plan on purchasing through HP Tuners.
Thank you.