The last update I can find is from 4 months ago, has there been any movement on this? I'm trying to decide which tuner to get for my 03 Cobra and already have HPtuners.
Thanks
Steve
The last update I can find is from 4 months ago, has there been any movement on this? I'm trying to decide which tuner to get for my 03 Cobra and already have HPtuners.
Thanks
Steve
I'm in the same boat as Steve and was wondering the same thing.
Thanks,
Troy
Looks like we are SOL on this for our old outdated clunkers man. I have been wanting to use HP Tuners for a long time on my 03 cobra but I think all the new stuff get support before us. I guess we are stuck with the stuff that is already out there for us.
I saw eric gave a wink about it in a thread a while back, so I believe its in the pipeline, but your right, new stuff will always come first!!!!!!!!!!!!!!
Michael Bray
Rusty Knuckle Garage
Slidell, Louisiana
20yr Master Tech.
Advanced Level Specialist
Custom Car Fabrication, Customization, High Performance.
GM World Class Technician
Shop Owner
Bumping this up. Would really like to use HP on 03/04 cobras.
I've heard that it will work on the 03/04 Cobra using an nGauge to communicate with the ECU. People say all the definitions and everything needed is in the HP Tuners software you just need a way to read and write and the nGauge can be used for that.
If I remember right, the current beta supports all EECV Mustangs as of right now. Using an nGauge will cut down on flash times.
2007 Ford Mustang GT/CS: RGR 322 3v - JPC Intake - Vortech YSi-B - Magnum T56 XL - Built 8.8 - Full Suspension
2008 Ford Shelby GT500: VMP Gen 2 - ATI 15% - SCJ TB - Full Bassani Exhaust - Full Suspension - Upper Pulley - Meth Injection - JLT 127mm
So no nGauge needed?
So glad to see that. Thanks
Just to clarify. When you say that its supported in beta, can you actually read the PCM? or can you only open a file that has been read by ngauge? supporting the ngauge file is one thing, reading/flashing is another. thanks.
2008 Ford F250 Lariat
2008 Corvette Z51 M6, Kooks LT, Corsa Performance, Vararam
So how does the licensing work with that? Is the VCM still used? Somebody explain this to me. lol
This is a promising update. So if I get the nGauge, I can pull a file and change it? Or do I have to have an original file and I can't pull it from the PCM?
I think this answered my question, but I just want to clarify. If the file wasn't written with ngauge set up, rather SCT PRP, can I still pull the file from the PCM with a new ngauge and edit through hp tuners, then rewrite?
Last edited by Svh19044; 06-03-2017 at 02:43 PM.
Which Beta do I need or is it in Ver 3.6
As I asked for the beta to test EEC and they posted said it was on my customer page two days later ver 3.6 appeared
You need the new stable version. 3.6.5
Currently there is no available Beta (as of yesterday, I asked)
2012 Mustang GT with S/C
4Runner with S/C
Turbo/NOS Hayabusa - 320RWHP