Hi Guys,
We have just finished setting up a supercharger on a BA XR8 , now for the tuning part.
We have done them in the past just basically setting them up to get the right fuelling at WOT
and setting up the spark etc to suit. What I would like to do this time is set it up to read load into
boost like the turbos do. I have fitted the XR6T map sensor and have it reading boost etc.
My question is how do you set up the load tables to correspond with boost. Ive done a bit of a
search but havn't really come up with an answer. I know its able to be done just not sure
on the correct way to set it up. I have attached the original tune file
with the boost enabled so it reads ok on the scan tool.
Any thoughts/ideas welcome, im sure im not the only one keen on tuning this way....
Cheers