Standalone should work fine in 2.23.621, the only thing disabled is the analog inputs.
Standalone should work fine in 2.23.621, the only thing disabled is the analog inputs.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Well great...I was wondering why I kept getting the error light when trying to data log without my pc. So is this resolved now? I'm gonna have to agree that it's pretty shitty that your selling a product with feature that doesn't work.
98 Trans Am, M6, 3.90's, Lid, Z06 MAF, LS6 intake, EGR & AIR delete, ARH LT's & ORY, Magnaflow CB, & a little giggle gas.
I got 98 problems, but Vtec ain't one.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Pre defined inputs enabled in the newest beta, for anyone that wants the update check your customer page, if it shows 2.23 you already have access, if your customer page only shows 2.22 email support with your MPVI Pro serial number and we'll post the update to your customer page.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
What's the build number for the newest Beta Bill?
tia
2.23.847ish
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Got it thanks Bill!
"Pre defined inputs enabled in the newest beta,"
So Does this mean that situation b. is now working too? I am using an AEM wideband with the analog input. I "think" it was pre defined, as in an available option within the software, so will I be able to do stand alone logging with the ability to capture my AEM wideband with it?
b. analog inputs disabled in the beta software
2006 GTO M6 T76 Turbo Intercooled
Thanks for the update Bill.
Just to be clear... EIO *is* enabled in this beta in stand-alone logging and must be used with Pre-defined PIDs for external input logging; NOT user-defined, correct? I just want to make sure I understand exactly what you are saying.
Thanks again; sounds like you guys are getting us going in the right direction!
Correct, with that said I think you might be able to log input voltage which you could make a custom pid from temporarily.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
That's where I was going with that!
Since that last post, I was wrapping up a car on the dyno. For grins, against my adjusted user-PID used for an AFX, I loaded the canned AFX PID. It was off a little less than two tenths (though close to that) around idle and the error actually decreased down around 11.0:1 AFR. It's been a long time since I have used that; I was pleasantly surprised to see it track as closely as it did.
Thanks for taking the time to clear this up.
New beta up with the aux inputs enabled as well now.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Can the new beta run custom pids on the stand-alone data logging, you said no, but does last post mean yes?
Will GM 3-bar map be added to the EIO options list, currently only have 1 and 2 bar as options, it would be nice to be able to just select 3-bar instead of having to create a custom setup.
Last edited by SlowFiero; 01-30-2013 at 04:25 AM.
1986 Fiero GT
L36 3800, 6262 billet turbo, 206/206 cam, ID1000, 4T65E, 235/60R15 M/T DR.
10.263 @ 134.44 MPH with 1.49 60' @ 3130lbs