Hey guys, need some help if anyone is willing.
Supercharger went in yesterday and need some input or ideas as to what the hell is going on here...lol I managed to get it to idle, not well, but it will idle. Trims at idle are pretty close actually, but as soon as I put it in gear, trims go negative or positive to the tune of around 35% or so! So, shes going pig rich and if I try to pull away from a stop it bogs like crazy then all of a sudden it kicks in and pulls away. Then when comming to a stop all hell breaks loose. Sometimes it will die, but mostly the rpms will drop to lke 500, you can hear the poor tensioner going beserk, then it will kick in and idle OK.
So, biggest issues right now seem to be trying to pull away from a stop, fuel trims going huge negative/positive, and comming to a stop. One time it will go rich, then it will go crazy lean when put in drive. Its insane! Look at the log I just did and see if you guys can figure this one out with me
This is a Vortech Belt Driven charger with a vac referenced BOV. If anyone can point me in the direction I need to go I will be forever in your debt guys.... ** Like I'm not already... hahhaha