I am having trouble setting up the AFR error
I am using 2.23 beta
LC-1 hooked up through the egr position
The AFR agrees with the gauge so i have that setup properly.
If I have the Stock AFR error in the table it will display properly but will not record. After the recording it shows parameter not supported, but during recording it shows properly. And it doesn't matter weather it is logged with the laptop or MPVI pro or not, the results are the same.
I configured my own afr error 100*([USER.9004]-[SENS.121])/[SEN.121] this displays 100X% actual afr percent.
Also tried 100*(([PID.2811]/.5)+10)-[SENS.121])/[SENS.121] this always displays 0%