ok. car ran perfect. 2005 corvette. did the 2 bar SD conversion, and did a direct plug and play MAP that i had taken off a 04 GTO thats was also a 2 bar tune, that was new and WAS working fine on that car. now my car wont run. map reads 199 when key is on and when i start it it goes at the lowest to 125 KPA. but no matter what the car wont run for more than 2-3 seconds. we have done a few SD tunes on 04 and older cars but this will be our first 2005 and up. the other question i had is, is it normal for the boost VE to start at all ZEROS? do i have to make that all from SCRATCH? attached is the log of the start up, and the current tune.