Are you a serial interface user or usb?Originally Posted by JasonB
Are you a serial interface user or usb?Originally Posted by JasonB
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
If you have a serial interface (not MPVI USB) then the download will be quite old. We had to wait a very long time for hotmail and other similar mail services to allow email to them after we relocated our servers to our new office (our new IP's were being blocked and we didn't account for this possibility). This is the main reason some people may have noticed the 2.22 download a couple of months ago but strangely saw no announcement from us. Rather than say something and then be asked everyday if things had been fixed we decided to just wait.
Since we had added some new parameters for newer vehicles in between times we recompiled 2.22 for MPVI (USB) users only just recently and once we got the all clear made the final 2.22 announcement. Unless we move office in the near future, we shouldn't see this situation again
Hope this clears it up.
Chris...
I count sheep in hex...
I have the serial interface.Originally Posted by Bill@HPTuners
Serial interface users have a completely different version number than USB users. Chris explained it best in his above post.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Mine also says April 30, but when I downloaded the file again it did change my version to 2.22.3110.28034.
*nevermind I didn't see page 2*
Hi,
We downloaded the V2.22 software and we run VCM editor we get a message box that pops up that says:
VCM Editor.exe -.NET Framwork Initialization Error
C:\windows\microsoft.NET\framework\v2.0.50727\mscr owks.dll could not be loaded.
We also downloaded and installed .net framework 2.0. We checked the folder and that particular file is in the correct location.
What do we need to do get this working?
Thanks
Windows SP2
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
We downloaded and installed NetFx20SP1_x86. Is this correct? Anyway, it didn't work. Any other ideas?
No, windows XP SP2
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
sorry for the dumb question but even though the build date says april 30th, i should still download it again for the newest revision?
2006 Ford F250 CCSB 6.0 Powerstroke
SCT Tuned by Vivian @ QuickTricksAutomotive
Yes, we've added new support & features as recently as last week.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Um, then you REALLY need to include the ENTIRE version number on the home page so people know at a GLANCE whether they have the latest version. Just a thought. The next obvious thing to do is include a list of changes so we can decide whether we need to risk updating our working versions for junk we may not need. JMHO, thanks for all your efforts.
I re-download and re-install every week or so. I want all the available "junk" asap
When was the last update?
2006 Pontiac GTO
2003 Infiniti M45--- Payed off
2009 BMW 135i- Awaiting Transport
Mods: TigerShark Cam Package, Volant intake, GFI Ported TB, GMM Race, MSD Plug Wires, Stainless Work headers w/cats, Magnaflow X-pipe, Kooks "Afterburner" Axlebacks, Pedders Strut Bar, Pedders Street I, Drift R 19", HpTuners
RWHP: 419.72 RWTQ: 402.51
~1 month ago, next public update will be 2.24
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Last download I had of 2.22 has a file date of Aug 18th (downloaded within the last few days).
97 Grand Prix GTP (not going to bother listing mods in detail) 1 messed up 97 PCM with about 30-50% of a 2003 calibration and parts of a few others.
Any hints on what 2.24 will have?
2006 Pontiac GTO
2003 Infiniti M45--- Payed off
2009 BMW 135i- Awaiting Transport
Mods: TigerShark Cam Package, Volant intake, GFI Ported TB, GMM Race, MSD Plug Wires, Stainless Work headers w/cats, Magnaflow X-pipe, Kooks "Afterburner" Axlebacks, Pedders Strut Bar, Pedders Street I, Drift R 19", HpTuners
RWHP: 419.72 RWTQ: 402.51
Any word on Enclave support in 2.24?
2006 Pontiac GTO, Torrid Red, M6, "LS2.5"
- LS3 Heads; 11.5:1
- ARH Headers
- Magnaflow
- Svede
- RipShift race
- No Lift Shift
2012 Chevrolet Cruze, Blue Topaz Metallic, M6, 1.8
- Stock
- 42 MPG
OK its been a long while since I worked with HP tuners. I bought it a while back. My CD displays ver: 2.0.16 Is my serial number the ID#??? Also I have moved twice. I dontknow which email was attached to this serial number. Any help to obtain the 2.22 update.
Edit...Reread FAQ..I had to add the zero's in front of my ID/Serial # ---------All good now.
Thanks
Last edited by bowtye; 10-25-2008 at 07:52 PM.