Results 1 to 2 of 2

Thread: Roush gen 1 tune questions

  1. #1
    Potential Tuner
    Join Date
    Feb 2022
    Posts
    1

    Roush gen 1 tune questions

    Hello all, I am pretty new to tuning and the car i am tweaking on is a 11 5.0 This is not my tune..mods include roush blower with an 82mm pulley. built 6r80 with circle d 2c stall, bap and some injectors.
    I posted the tune as well as a log from the track.
    I'm wanting opinions on the current tune on the car.
    the tune to me looks like it needs quite a bit of refining. above 5400 the timing source goes to the pre detonation timing table. it looks to lean out a tad to me and has some KR. the car short shifts to 6th etc etc. just looking to see what is thought about it from a more trained eye. Thanks
    Attached Files Attached Files
    Last edited by carbon coyote; 03-28-2022 at 06:34 PM. Reason: Missed info

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    its not lean at all, its running on pre-ignition as its acting more like a timing cap table
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161