5.3 small cam
freshly rebuilt 4l80e with circle D 3000 stall
82 s10
Shifts seem slow. I'm not sure that it's actually shifting to 4th, i manually pull back to 3rd and the rpms stay the same.
I'm also trying to understand the relationship between input output shaft speed and RPM, i also noticing TCC slip at times. Also tcc mode: apply en, apply. I was only expecting to see lock and off.
I've air checked 4th gear, looked over the valve body, everything moves, nothing is binding.
IS the trans slipping, converter slipping
Here is a video of the log:
https://www.youtube.com/watch?v=yGko0KuPtm0
Figured out how to include, tune, log and config. Hope someone can shed some light on what is going on.
basic with trans stuff.Channels.xml
0929 drive short trans issue.hpl
0929 drive.hpt