HPTuners being a butthead with columns

[DiceDaLova]

I cant figure out how to add channels or factors to the columns on a Table, I did it in the past but cant figure it out now. I included a pic for reference, I need the bottom picture to look like the top table. Thanks

Values.jpg

[mowton]

You can't change the Editor tables unless the axis label is underlined (gen iv and up only). Do you mean you want to generate a table in the Scanner Graph?

Then right click anywheres in the editor table and a window will appear. Use the Column and Row axis commands and Copy Labels. Then go to the Scanner, open the Graph you want to create/change, place cursor in appropriate column/row units and paste the labels.

Ed M

[Frost]

I cant figure out how to add channels or factors to the columns on a Table, I did it in the past but cant figure it out now. I included a pic for reference, I need the bottom picture to look like the top table. Thanks

Values.jpg

Your picture is 2 different base generations of controllers / their software. They may be interchangeable to flash, but things like table break-points are fixed. The later OS's had more res on some tables like idle-flow, so you get what you see there.

[DiceDaLova]

So theres no way to get all the variations like the top picture shows? I snapped that picture from a couple of months ago, I use to use it to go off of to do start up cams for 5.3s... Havent tried it in awhile and I pulled it up last night and it has more variations then the new setup. Coolant Temp Column shows -40 -18 3 25 46 68 90 111 133 154 176 198 219 241 262 284
and the bottom only has -40 -4 32 68 104 140 176 212 248 284... Anyway to add more to the column at all, even if not as many variations are the old one. Thanks guys.

[5FDP]

No, they are fixed.

What you see is what you get. Looks be like an early 98-99 file based on the picture. Later calibrations got more numbers.

[mowton]

So theres no way to get all the variations like the top picture shows? I snapped that picture from a couple of months ago, I use to use it to go off of to do start up cams for 5.3s... Havent tried it in awhile and I pulled it up last night and it has more variations then the new setup. Coolant Temp Column shows -40 -18 3 25 46 68 90 111 133 154 176 198 219 241 262 284
and the bottom only has -40 -4 32 68 104 140 176 212 248 284... Anyway to add more to the column at all, even if not as many variations are the old one. Thanks guys.

As we have stated, you cannot change the axis breakpoints but you can increase the resolution of the Scanner Graph table to provide values closer to the Tune axis breakpoint instead of its average across a larger range. I use that for the RAF and also the VE at times....

Ed M

[Frost]

So theres no way to get all the variations like the top picture shows? I snapped that picture from a couple of months ago, I use to use it to go off of to do start up cams for 5.3s... Havent tried it in awhile and I pulled it up last night and it has more variations then the new setup. Coolant Temp Column shows -40 -18 3 25 46 68 90 111 133 154 176 198 219 241 262 284
and the bottom only has -40 -4 32 68 104 140 176 212 248 284... Anyway to add more to the column at all, even if not as many variations are the old one. Thanks guys.

Yes, use a 01-02 base file instead of the 99-00 base (assuming it's a swap and you can do that...).